Honda Wave Motad Modding
Aprlia Tuono 1000 R Factory
Now the Tuono 1000 R Factory has picked up where the victorious Tuono Racing left off, with even better technical characteristics and performance.
With the arrival of the new Factory version, the most racing naked and the meanest on the road clearly demonstrates its racing spirit. The new Tuono 1000 R Factory is a truly professional machine for all those riders who demand the state of the art in technology and the absolute maximum in performance. As with the RSV 1000 R Factory, from which it has been derived, the Tuono 1000 R Factory is designed and built for “total ridability”, a concept that has always characterised high performance Aprilia motorcycles.
The Tuono 1000 R Factory sets new standards for performance nakeds. Now, the Tuono 1000 R Factory has raised the bar even higher, establishing the perfect synthesis between quality, technology, and finish.
The performance of the Tuono 1000 R Factory has been boosted to record levels by adopting the same latest generation engine that powers the RSV 1000 R Factory. Now developing 102 kW (139 HP) at the crank and a maximum torque of nearly 11 kgm at only 8,500 rpm, the Aprilia Tuono R Factory is the uncontested leader of all naked twins.
source via Aprilia
source via Aprilia
Mrs. Motorcycle Bolted on me!
The other morning as I was getting ready for work, My wife comes back in the house after leaving for work herself. She said, "Mr. M., Something is seriously wrong with my Saturn. I need you to come look at it. I was driving along, and heard a pop, then clunk, clunk, clunk. I stoped and looked, but no flat tire! I want you to look." I took the car for a drive, and noticed it when I was pulling out the driveway. I needed to go no further than 1/2 of a block away from my house to realize there was something wrong with the left rear wheel. I pulled it back into the garage to see a bolt stuck into the tread at the back side on the line of tread, and sidewall.
This is what I found!
This put an interesting spin onto my day.
I got a plug put into the tire, drove her vehicle for the day. She took mine, and I got a new set of rear tires on it during the day.
I got my wife to get me a case and a half of beer later on that day for being such a good boy!
Motorcycle Pictures of the Week - Linda and Rollsroyce77
Here are my Pictures of the Week as displayed on the Motorcycle Views Website. These are taken from the Moto Pic Gallery. See Linda on her 2003 Harley-Davidson Dyna Low Rider. Also see Rollsroyce77 on his 2002 Honda VTX1800 Retro. For details, see Motorcycle Pictures of the Week.If you'd like to see your bike as Picture of the Week, submit a picture of you and your bike along with a description of the bike.
MODIFIKASI BAJAJ PULSAR
If only the writing motorcycle brand in the gas tank, firing and under saddle back removed, you must have guessed moge (big motorcycles). In fact, if glimpsed from the front like the Italian-made motorcycles that now prevail in the Superbike world championship.
Indeed, these two-wheeled vehicle called the Bajaj Pulsar 180 DTS-I made in 2007 came from India. Heri Syahrimen, the owner who lives in Riau is memperkekar besutannya really good.
The concept is simple, do not alter the body's character dinilainya sports turing.Ia apply only full-dress style firing aka MotoGP models. "This will be added Pulsar box for turing," said the chairman of Riau Bajaj Community (RBC).
Uniquely, Bajaj Pulsar home modification is worked out in Ciledug Raya, Tangerang. Rudi, "the repairman engineer" standard bare block up the middle so as not to wear clothes when Bajaj CBR600 model made of fiberglass.
Quite limited firing only. No! Rudi change the style sepatbor motor Itallia, Cagiva Raptor. Similarly sepatbor laced back design that Dainese has become characteristic of Blessing modif Motor (BM) where the motor Rudi dressing.
In addition to the standard, front shock breaker also be a booster when he was about to set firing. Not replaced because the owner may still want to use the default. But the front sok mpanjang inadequate juxtaposed with handlebar-flops.
Rudi was not losing my mind. The solution, using self-made adapter from the diameter steel pipe with the standard tomorrow. Pipe was then made and close the system self-drat. 5 cm in length was made
Indeed, these two-wheeled vehicle called the Bajaj Pulsar 180 DTS-I made in 2007 came from India. Heri Syahrimen, the owner who lives in Riau is memperkekar besutannya really good.
The concept is simple, do not alter the body's character dinilainya sports turing.Ia apply only full-dress style firing aka MotoGP models. "This will be added Pulsar box for turing," said the chairman of Riau Bajaj Community (RBC).
Uniquely, Bajaj Pulsar home modification is worked out in Ciledug Raya, Tangerang. Rudi, "the repairman engineer" standard bare block up the middle so as not to wear clothes when Bajaj CBR600 model made of fiberglass.
Quite limited firing only. No! Rudi change the style sepatbor motor Itallia, Cagiva Raptor. Similarly sepatbor laced back design that Dainese has become characteristic of Blessing modif Motor (BM) where the motor Rudi dressing.
In addition to the standard, front shock breaker also be a booster when he was about to set firing. Not replaced because the owner may still want to use the default. But the front sok mpanjang inadequate juxtaposed with handlebar-flops.
Rudi was not losing my mind. The solution, using self-made adapter from the diameter steel pipe with the standard tomorrow. Pipe was then made and close the system self-drat. 5 cm in length was made
Ride For Their Lives! Home For Life Animal Sanctuary
Last weekend, I finally got to break out, and go for a ride. Any reason to ride is good, but riding for a cause you believe in is even better. I've been lacking on posting, commenting and riding lately due to storm season and my job. This has been keeping me more than busy. So it felt really, really good to get on the bike again. I put on about 350 miles last Saturday.
The ride was just another ride like any other good ride. There were lots of great twisty roads, and a good time to be had while enjoying beautiful scenery whilst rolling along on two wheels. I could have done this ride and likely a much better one with my friend Daren, whom I rode with, but the ride, or the "run" was only part of the reason to be out on two wheels this day. It was for the annual Ride for Their Lives Run. It was for the cause many of you know I deeply believe in. It was for the animals in need.
I rode in the "Ride For Their Lives" run.
This was sponsored by "Doc"Desio of St. Croix Harley-Davidson, and held for Home For Life. The Animal Sanctuary of St. Croix Valley, Inc.
Home For Life® is a new kind of animal shelter. It is a long-term animal sanctuary. Home for Life® provides lifetime care for special needs animals that while still able to lead quality lives but are unable to find a home due to age, chronic treatable disorders, handicaps or similar reasons.
Here are some pictures of the animals being helped, and some ride photos. Kudos to this wonderful organization!!!!!
When I go, Take me in one of these!!!!
A trick trike fitted for a Guy in a wheelchair.
"Doc" from St. Croix Harley-Davidson, and Officer Sweeny
Dogs with wheels
Dogs with wheels
The cat house
Cute Cocker
Look, the animals have their own houses, with air conditioning!
Many kinds of animals here.
A goat with wheels
Great job on organizing the ride! There was great food, and fun. They even had drawings.
Course, I won nothing. But I had a good time anyway!
Subscribe to:
Posts (Atom)